Hello, I run a smartctl command to check my ssd health but I am not sure if it's healthy, the result is passed but there are two errors there:
Code:
$ sudo smartctl --all /dev/nvme0n1p1smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-30-amd64] (local build)Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org=== START OF INFORMATION SECTION ===Model Number: PCIe SSDSerial Number: DDC30789174C00029358Firmware Version: ECFM12.3PCI Vendor/Subsystem ID: 0x1987IEEE OUI Identifier: 0x6479a7Total NVM Capacity: 480.103.981.056 [480 GB]Unallocated NVM Capacity: 0Controller ID: 1NVMe Version: 1.3Number of Namespaces: 1Namespace 1 Size/Capacity: 480.103.981.056 [480 GB]Namespace 1 Formatted LBA Size: 4096Namespace 1 IEEE EUI-64: 6479a7 1000043538Local Time is: Sat Jan 25 09:23:29 2025 -03Firmware Updates (0x12): 1 Slot, no Reset requiredOptional Admin Commands (0x0007): Security Format Frmw_DLOptional NVM Commands (0x0056): Wr_Unc DS_Mngmt Sav/Sel_Feat TimestmpLog Page Attributes (0x08): Telmtry_LgMaximum Data Transfer Size: 512 PagesWarning Comp. Temp. Threshold: 70 CelsiusCritical Comp. Temp. Threshold: 90 CelsiusSupported Power StatesSt Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 8.12W - - 0 0 0 0 0 0 1 + 6.40W - - 1 1 1 1 0 0 2 + 5.54W - - 2 2 2 2 0 0 3 - 0.0490W - - 3 3 3 3 2000 2000 4 - 0.0018W - - 4 4 4 4 25000 25000Supported LBA Sizes (NSID 0x1)Id Fmt Data Metadt Rel_Perf 0 - 512 0 2 1 + 4096 0 1=== START OF SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSEDSMART/Health Information (NVMe Log 0x02)Critical Warning: 0x00Temperature: 46 CelsiusAvailable Spare: 100%Available Spare Threshold: 5%Percentage Used: 9%Data Units Read: 51.675.124 [26,4 TB]Data Units Written: 50.268.470 [25,7 TB]Host Read Commands: 359.137.891Host Write Commands: 773.368.042Controller Busy Time: 1.663Power Cycles: 22.642Power On Hours: 4.732Unsafe Shutdowns: 16.812Media and Data Integrity Errors: 0Error Information Log Entries: 10.750Warning Comp. Temperature Time: 21Critical Comp. Temperature Time: 0Error Information (NVMe Log 0x01, 16 of 63 entries)Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 10750 0 0x0000 0x4004 0x028 0 0 - 1 10749 0 0x1008 0x4004 - 0 0 -
Statistics: Posted by fch — 2025-01-25 12:26 — Replies 3 — Views 85